|
Post by geoffbot on Mar 5, 2018 20:43:58 GMT
So what are the minimum tools I need to replace these?! I assume I need lithium grease too...
Ta
|
|
neo
Junior Member
Posts: 31
|
Post by neo on Mar 5, 2018 20:49:08 GMT
So what are the minimum tools I need to replace these?! I assume I need lithium grease too... Ta A set of spanner’s if I recall 10mm or 12mm for the clutch adjuster (arm end) I think 10mm socket and some Allen keys for the levers, a dab of grease on the nipples can’t harm oo err .. you’ll need to re use your bush out of one of the levers I think it was the clutch side is just slides in where the bolt goes through it’s very easy and apparent once removed.
|
|
|
Post by geoffbot on Mar 5, 2018 22:11:49 GMT
Thanks bud
|
|
|
Post by geoffbot on Apr 29, 2018 20:36:44 GMT
Fitted! Much better.
|
|
|
Post by stevieninja on Oct 1, 2018 18:06:32 GMT
Hi a bit off topic in your lever post. But can I ask what make of barend mirrors you have and where you got them. I've been looking for a while and not found any that fir the threaded bar of the Mt 10.thanks
|
|
|
Post by charwood23 on Oct 2, 2018 14:33:02 GMT
Hi a bit off topic in your lever post. But can I ask what make of barend mirrors you have and where you got them. I've been looking for a while and not found any that fir the threaded bar of the Mt 10.thanks If you're asking about mine they were 3 Pistons (no longer trading). I have removed them and re-fitted my cheap Chinese ones as the view is much better. There are other options that are identical though. Search bar ends on the MTOCUK FB page and you'll find a link at £45 if I recall. As for using the threads the only make I know are Rizoma but they're mega bucks at around £160 a pair depending on style.
|
|
|
Post by stevieninja on Oct 2, 2018 14:54:08 GMT
Hi a bit off topic in your lever post. But can I ask what make of barend mirrors you have and where you got them. I've been looking for a while and not found any that fir the threaded bar of the Mt 10.thanks If you're asking about mine they were 3 Pistons (no longer trading). I have removed them and re-fitted my cheap Chinese ones as the view is much better. There are other options that are identical though. Search bar ends on the MTOCUK FB page and you'll find a link at £45 if I recall. As for using the threads the only make I know are Rizoma but they're mega bucks at around £160 a pair depending on style. thanks bud. I'll have a look, can you did you fit them using the universal expanding grommet thing?
|
|
|
Post by charwood23 on Oct 6, 2018 3:01:01 GMT
Yes. They come with the fittings you need.
|
|
solo
New Member
Posts: 3
|
Post by solo on Nov 28, 2018 20:03:40 GMT
MT10Beast - They don't on mine but it depends where your clamp sits on the bar. If they do hit it then just move the clamp up towards the switch gear. Mines right up against it and no dramas. Bogie - I get that but I like the red accent on the few little buts I have. As someone the FB page said, wouldn't it be boring if we all liked the same things? All you have to do is ask... I got them with black adjuster (same price, just added a comment when ordering them on Amazon)..
|
|