|
Post by seefour on Jan 16, 2018 8:08:38 GMT
All,
Any recommendations for replacement levers the standard one's are a bit wanting, looking for some nice short anodized ones. Any links or advise would be appreciated.
its at the dealers and pick up is march 1st.
Seefour
|
|
|
Post by rizla on Jan 16, 2018 20:09:35 GMT
I have titax on my SP.
I originally had Gilles and they were brilliant with loads of adjustment, but when I changed to an R1 radial master cylinder the brake side no longer fit.
Titax are also great levers and I opted for the short version R1 brake lever and MT clutch lever.
|
|
|
Post by ghostrider.1127 on Jan 17, 2018 19:14:59 GMT
pazzo racing (have them on 2 mt10 and 2 mt09 with r1 radial master)
|
|
|
Post by Bogie on Jan 18, 2018 0:58:35 GMT
Love my Pazzo's
|
|
|
Post by X Plane on Jan 18, 2018 22:33:24 GMT
|
|
|
Post by charwood23 on Jan 25, 2018 20:25:41 GMT
|
|
|
Post by mt10beast on Jan 26, 2018 9:30:10 GMT
Wow, loving the look of them, especially for £35 I assume for a pair.. Is there much play in them
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 26, 2018 19:18:54 GMT
Charwood, does the cruise control still work as normal with the levers, i am liking the shape of these!
|
|
|
Post by charwood23 on Jan 26, 2018 22:25:47 GMT
Not much play at all. They are a great fit. I did have to nip up the little locking nut on the clutch once fitted. All cruise control etc works fine. They are really simple fit and well worth getting irrespective of the price.
|
|
|
Post by mt10beast on Jan 26, 2018 22:29:26 GMT
Not much play at all. They are a great fit. I did have to nip up the little locking nut on the clutch once fitted. All cruise control etc works fine. They are really simple fit and well worth getting irrespective of the price. Thanks, Ordered.. does the clutch lever touch the switchgear when fully pulled in
|
|
|
Post by Bogie on Jan 27, 2018 1:42:05 GMT
They look good. Like them better if the adjuster wasn't red.
|
|
|
Post by charwood23 on Jan 27, 2018 10:35:21 GMT
MT10Beast - They don't on mine but it depends where your clamp sits on the bar. If they do hit it then just move the clamp up towards the switch gear. Mines right up against it and no dramas.
Bogie - I get that but I like the red accent on the few little buts I have. As someone the FB page said, wouldn't it be boring if we all liked the same things?
|
|
|
Post by mt10beast on Jan 27, 2018 10:37:23 GMT
MT10Beast - They don't on mine but it depends where your clamp sits on the bar. If they do hit it then just move the clamp up towards the switch gear. Mines right up against it and no dramas. Bogie - I get that but I like the red accent on the few little buts I have. As someone the FB page said, wouldn't it be boring if we all liked the same things? Cheers mate
|
|
|
Post by Bogie on Jan 27, 2018 12:21:55 GMT
MT10Beast - They don't on mine but it depends where your clamp sits on the bar. If they do hit it then just move the clamp up towards the switch gear. Mines right up against it and no dramas. Bogie - I get that but I like the red accent on the few little buts I have. As someone the FB page said, wouldn't it be boring if we all liked the same things? I agree. My statement on the red was just for my preference.
Make it your own is always my policy.
|
|
neo
Junior Member
Posts: 31
|
Post by neo on Jan 28, 2018 18:56:44 GMT
Cheers for the post I ordered some from Amazon 👌
|
|