|
Post by rizla on Feb 17, 2018 15:04:35 GMT
So, I bought a set of R1m headers to go with my Akra decat and end can. The weight difference is amazing. MT headers = 2.9kg R1m headers = 1.8kg MT10 headers and cat = 8.9kg R1m headers and Akra decat = 2.6kg A saving of 6.3kg 😳
|
|
|
Post by rizla on Feb 17, 2018 15:12:17 GMT
|
|
|
Post by ghostrider.1127 on Feb 17, 2018 15:47:03 GMT
Still waiting my linkpipe .... than will fit am exup (from gsxr1000 2002 ). Nice sound BTW. Really an improvement !
|
|
|
Post by Bogie on Feb 17, 2018 23:54:28 GMT
Nice! Someday if I come across a reasonable priced set that aren't trashed here in the states I might do this as well. Will have to wait a bit. Too many projects going right now. LOL
|
|
|
Post by tancakar on Feb 18, 2018 22:41:04 GMT
you are going to die when you see my exhaust system i just bought a GRAVES EVR
|
|
|
Post by Bogie on Feb 19, 2018 0:11:51 GMT
you are going to die when you see my exhaust system i just bought a GRAVES EVR Been burned by them twice over the years. Once on rearsets and once on a full system. They won't get a 3rd chance to give me shitty service.
|
|
|
Post by tancakar on Feb 19, 2018 10:37:06 GMT
you are going to die when you see my exhaust system i just bought a GRAVES EVR Been burned by them twice over the years. Once on rearsets and once on a full system. They won't get a 3rd chance to give me shitty service. Well I bought from another person NEw condition for good price, I didn't buy it from America so I should be ok. My only reason is I really like DECAT but I don't want extra loud exhaust with no back pressure left.
|
|
|
Post by ghostrider.1127 on Feb 19, 2018 15:23:23 GMT
|
|
|
Post by tancakar on Feb 19, 2018 15:25:30 GMT
i saw that somebody just did their own version of EVR system which is clever , i still like the titanium though
|
|
|
Post by ghostrider.1127 on Feb 19, 2018 16:03:52 GMT
I would like the EVR too , but it come without bracket for the carbon heatshield on my termignoni , so i bought one with the brackets and i´m gonna to fit an exup in it . (ending cheaper than the EVR , with the plus of a end can with E numbers )
|
|
|
Post by richie on Feb 5, 2020 13:01:37 GMT
So, I bought a set of R1m headers to go with my Akra decat and end can. The weight difference is amazing. MT headers = 2.9kg R1m headers = 1.8kg MT10 headers and cat = 8.9kg R1m headers and Akra decat = 2.6kg A saving of 6.3kg 😳 Hi Are all R1M titanium headers a straight swap for a 2016 MT10 and can I keep the Cat and rest of the standard exhaust? I can buy a new set for a reasonable price and might look to swap for aesthetic reasons. Cheers Rich
|
|
|
Post by ghostrider.1127 on Feb 7, 2020 12:56:40 GMT
header from r1 or r1M (not r1S !!!!) 2015/2019 are a straight swap.
|
|
|
Post by exuptoy on Feb 7, 2020 18:24:33 GMT
header from r1 or r1M (not r1S !!!!) 2015/2019 are a straight swap. Are standard R1 headers actually Ti then Bjorn? Thought it was only the R1M? Do they sell the R1S in the U.K.?
|
|
|
Post by richie on Feb 9, 2020 21:03:34 GMT
header from r1 or r1M (not r1S !!!!) 2015/2019 are a straight swap. Thanks Ghost Rider
|
|