delta
Full Member
Posts: 107
|
Post by delta on Jan 3, 2019 18:24:40 GMT
I’m taking my sp to Geoff at hilltop motorcycles to have his ecu tune. He did my fz1 and that put 150bhp at the wheel after his rolling road tune. I’ll add he is good and tunes about 80% of bsb bikes and a few teams too. Just wondering if anyone has had an mt10 done especially the SP with the extra electronics and how it faired? Thanks Delta.
|
|
delta
Full Member
Posts: 107
|
Post by delta on Jan 3, 2019 18:29:46 GMT
|
|
|
Post by ghostrider.1127 on Jan 3, 2019 18:33:02 GMT
Still waiting ( early november)an answer from him about my Africa twin ...
|
|
delta
Full Member
Posts: 107
|
Post by delta on Jan 3, 2019 18:41:09 GMT
Still waiting ( early november)an answer from him about my Africa twin ... Give him a call, he’s away until the 7th though. I had txt from him saying so this morning. I know he gets very busy but if you hassle him lol. Tell him Paul aka soggy bollocks told you to ha. I’m just wondering how the mt10 tuned by him does. If I remember returning customers get a bit of discount too.
|
|
|
Post by ghostrider.1127 on Jan 4, 2019 7:55:30 GMT
Just saw there is no reflsh for the DCT , that´s why i never answer to me...
|
|
|
Post by mt10gaz on Jan 13, 2019 18:09:39 GMT
Best place to take it is j36 nr lancaster,he remaps it with the woolich software which is known to suit the mt10 and he has done quite a few,i got really badly ripped off at hilltop took my super tenere there paid £360 and couldn't tell any difference,months later got Bsd at eye nr peterborough recommended for future bikes but was still fuming about the hilltop thing and was too late to take it back,when i took it to BSD he said absolutely NOTHING had been done to it,i am still seething about it 6yrs later.
|
|
|
Post by dangermouse on Jan 13, 2019 18:54:37 GMT
Don't you mean junction 33 developments?
|
|
|
Post by mugambo on Feb 4, 2019 12:39:42 GMT
have used hilltop on my MT.. was ok but doesn't remove the AIS or O2 sensors etc had it removed and went woolich save your money and go P3/J33/Seton
|
|
delta
Full Member
Posts: 107
|
Post by delta on Feb 5, 2019 17:08:51 GMT
have used hilltop on my MT.. was ok but doesn't remove the AIS or O2 sensors etc had it removed and went woolich save your money and go P3/J33/Seton I’ve used hilltop Mc a few times and he’s done a great job on my fz1 and the mt10-sp. I’ve heard some horror stories about the woolwich way. Plus I hear they flood the low rpm to stop the snatchy throttle. That’s not how to do it. You need to use the R1 stepper motor as it has far more increments compared to the MT. I guess everyone has there own special tuner though.
|
|
polar
Full Member
Cold but getting there
Posts: 64
|
Post by polar on May 11, 2020 7:12:20 GMT
|
|