|
Post by harri183 on Dec 22, 2018 17:11:47 GMT
Going to refresh the fluid on the MT anyone done it on this bike, have done it loads on non abs bikes just wondered if there is a set procedure and do you have to bleed through the abs pump. Cheers
|
|
|
Post by exuptoy on Dec 22, 2018 18:38:29 GMT
I think you can just pull it through with a Mitivac or similar.
|
|
|
Post by X Plane on Dec 23, 2018 8:51:29 GMT
I renewed brake fluid at the 2 year old mark. I just bleed them as if they were non-abs. Good enough I believe.
|
|
|
Post by ghostrider.1127 on Dec 23, 2018 12:21:51 GMT
For a complete flush the abs module ,you will need to go and let the dealer use the yamaha tool to perform than . Or simply flush like a no abs bike , drive on a parking lot (slow) hard braking and let the abs kick in , 7-8 times before front than rear. After that flush another time both circuits. So you will obtain a full flush also for the module . Suggest to flush also the module after 4 years or after 40000 miles
|
|
|
Post by harri183 on Dec 23, 2018 23:42:07 GMT
Cheers for all the replies will give it a go.
|
|
|
Post by optimus on Jul 13, 2021 20:42:23 GMT
|
|