|
Post by ccmcfadyen on Oct 17, 2018 9:18:37 GMT
Anyone tried tank pads from these guys at ItalPadsAm looking for something a wee bit different.
|
|
|
Post by exuptoy on Oct 17, 2018 17:22:18 GMT
|
|
|
Tank Pad
Oct 18, 2018 9:10:11 GMT
via mobile
Post by 3056tat on Oct 18, 2018 9:10:11 GMT
I was looking at them but decided to go with motografix as they are made here in the UK. The quality and fit of the one I chose is the best I have had in many years of biking.
|
|
|
Post by ccmcfadyen on Oct 18, 2018 11:01:34 GMT
Yeah I had a motografix pad on my Fireblade. Not a fan of the current graphics options motografix seem to be doing for the MT 10. I have ordered up the carbon one. Will put some pics up when I get it on the bike.
|
|
|
Tank Pad
Oct 18, 2018 14:36:45 GMT
via mobile
Post by 3056tat on Oct 18, 2018 14:36:45 GMT
I am also not a fan of the motografix designs for the 10 so fitted a plain black one to blend in. Not a fan of the Yamaha tank pad either. Bearing in mind I ordered 2 off fleabay and they were total shite and a waste of money. Motorgrafix 👍👍👍
|
|
|
Post by exuptoy on Oct 21, 2018 20:04:09 GMT
I am also not a fan of the motografix designs for the 10 so fitted a plain black one to blend in. Not a fan of the Yamaha tank pad either. Bearing in mind I ordered 2 off fleabay and they were total shite and a waste of money. Motorgrafix 👍👍👍 You ordered 2 of the Italpad ones? Just ordered one from eBay, hope I have made the right decision. I too didn't like the MG design and I have had many of their full bike kits over the years. If the Italpad one os poor I may just contact Kurt with MG and ask him if he can do some sort of variation on the IP design as they do a one off service. I had different colours done on my Gixer K5 as I didn't like their design.
|
|
|
Tank Pad
Oct 21, 2018 22:10:17 GMT
via mobile
Post by 3056tat on Oct 21, 2018 22:10:17 GMT
No mate,I looked at the italpads and wasent sure,then ordered 2 different gineric ones(one after another when I wasent happy with the quality) Eventually got plain black MG one for my 18 plate Yamaha blue 10 to blend in. Well happy.
|
|
|
Post by exuptoy on Oct 21, 2018 22:19:46 GMT
Thanks for clearing that up.
I'll pop up a pic of the Italpad once fitted.
|
|
|
Post by exuptoy on Oct 22, 2018 8:20:13 GMT
In the interim I have made my own tank pad from the remnants of a sheet of R&G universal boot guard kit. First time out I noticed some light marking to the tank where my rucksack waist strap had been so I cut this out.
|
|
|
Post by ccmcfadyen on Oct 22, 2018 12:21:08 GMT
I ordered one too through their ebay store. Weirdly it was £10 cheaper than the italpads website :-0
|
|
|
Post by exuptoy on Oct 25, 2018 19:45:33 GMT
Arrived and fitted today. Similar to the MG ones. Very happy.
|
|
|
Tank Pad
Mar 11, 2021 23:24:05 GMT
via mobile
Post by specialk on Mar 11, 2021 23:24:05 GMT
In the interim I have made my own tank pad from the remnants of a sheet of R&G universal boot guard kit. First time out I noticed some light marking to the tank where my rucksack waist strap had been so I cut this out. View AttachmentI like this idea. Difficult to find simple plain tank pads.
|
|