rb
Junior Member
Posts: 22
|
Post by rb on Aug 5, 2018 18:55:33 GMT
Hi,
i have been looking at rearsets for my mt10, and have had no joy so far. From what I can gather is that maybe rearsets from a r1 will fit? But then brake switch etc to consider. Has anyone any knowledge of what fits or what's needed?
thanks,
richard
|
|
|
Post by geoffbot on Aug 8, 2018 7:46:13 GMT
|
|
|
Post by Bogie on Aug 8, 2018 23:40:28 GMT
I run Woodcraft Rearsets. Plug and Play
|
|
|
Post by carlos1989 on Aug 9, 2018 2:14:46 GMT
I run Woodcraft Rearsets. Plug and Play Do you need a brake pressure switch for the rear brake ? Or it's really bolt on like you said? Thx
|
|
|
Post by Bogie on Aug 9, 2018 10:50:17 GMT
I run Woodcraft Rearsets. Plug and Play Do you need a brake pressure switch for the rear brake ? Or it's really bolt on like you said? Thx I used the stock spring and switch.
|
|
rb
Junior Member
Posts: 22
|
Post by rb on Oct 28, 2018 7:35:49 GMT
I managed to get a used r1 set off eBay. Makes a huge difference to me, as standard ground down too easily. No sacrifice in comfort either. The rearsets are reasonably available, but it's the master cylinder that takes some finding. The guy I got them from had to ship one from USA. Cost me £120 in total.
|
|
taz
New Member
Posts: 4
|
Rearsets
Mar 13, 2020 19:36:24 GMT
via mobile
Post by taz on Mar 13, 2020 19:36:24 GMT
Will standard r1 rearsets fit the mt10? If so is it all the years or just the new shape 2cr model? Asking as i have snapef mine on the left hand side lol.
|
|