|
Post by blueheart on Jun 4, 2018 14:25:55 GMT
Hi guys
I have the OEM MT10 heated grips and want to know if the rubber can be replaced with better, grippier, softer rubber grips. I find the standard rubber too hard and very slippery so I was looking at fitting better quality grips but I'm not sure where the heating elements are. Are they in the rubber or underneath it on the bars themselves.
I don't want to cut them off and damage the wiring elements.
|
|
|
Post by owle on Jun 5, 2018 5:49:01 GMT
|
|