Post by MT10-UKOC ADMIN on Jun 21, 2017 12:39:50 GMT
2016 Yamaha MT-10
Episode 1
2016 Yamaha MT-10 SP Engineering Exhaust - fit and sound
Episode 2
BJ pops to JHS Racing's dyno to check out how the MT fares with the SP Engineering can and Y-piece
Episode 3
BJ briefly checks in with some blurb on the MT-10 and some other bits and pieces.
Episode 4
Bit of a long one this, with clips of tyre changing (To Pirelli Rosso Corsas), wheel balancing, bearing advice and an entire calliper's worth of brake pad change (to the Brembo Road & Trackpads)
Episode 5
Latest longterm Yamaha MT-10 Vlog - a bit of engine protection, mucho yapping, a couple of wheelies and nice darkie laid down on track if you look close enough!
Episode 6
Another long one this, mostly taken up by the suspension setup.
Episode 7
This episode features a new y-piece and can from SP Engineering, and some more yap about the MT-10 and new MT-10 SP!
Episode 8
The MT goes on the JHS dyno to check out how the SP Diabolus can and y-piece fares and some other stuff...
Episode 9
It's off to JHS to get the Power Commander V fitted, but also the Bikesport developments Blip-box downshift blipper, where Mick sets it up on the JHS dyno! - UPDATE - The Blipbox does not need to be set up on the dyno if you buy one, this was basically the setup for all Blipbox units, although you can fine-tune them to your liking, should you wish.
Episode 10
We take the MT to JHS Racing to have the Power Commander V mapped, searching for the 150bhp rear wheel figure goal! Oh, apologies in advance, not our best video work but, hey, it's Xmas and we've other stuff to do
Episode 11
This time around, having a Nitron rear shock fitted.
Episode 12
As you were all so patient, for months, here's some more MT'ing for you.
We look at another man's awesome MT, then JHS James shows us how to bring a chain back to life, before we move on and discuss a new exhaust, ECU flashing and, yes, those Jubilee clips on the Nitron shock...