|
Post by ghostrider.1127 on Aug 24, 2017 10:26:07 GMT
|
|
|
Post by Clemo on Aug 24, 2017 11:29:41 GMT
Nice one mate, I did try and hunt my old CB down but it looks as though it had been off the road for a while, probably trashed? Would of bought it back, spent a fortune on it too.
|
|
|
Post by Clemo on Sept 10, 2017 14:30:18 GMT
Waited 3weeks for the baffle to arrive from Italy only to find it don't fekin fit😡
|
|
|
Post by ghostrider.1127 on Sept 10, 2017 18:37:54 GMT
Which did you bought ? still have few , somewhere in the garage
|
|
|
Post by Clemo on Sept 10, 2017 21:39:28 GMT
Which did you bought ? still have few , somewhere in the garage Bought the TUV-111 mate, yeah still got it
|
|
|
Post by ghostrider.1127 on Sept 12, 2017 18:14:52 GMT
strange on my can fit without problems
|
|
|
Post by Clemo on Sept 12, 2017 18:18:56 GMT
strange on my can fit without problems No idea either mate. It's defo the tuv111, and mt10 Akra
|
|
|
Post by covertlaugh on Nov 20, 2017 12:32:26 GMT
Ghostrider do you still have to drill a retaining bolt into the mt10 Akra with the tuv 111 baffle? Thanks
|
|
|
Post by Clemo on Nov 20, 2017 12:53:05 GMT
I couldn't get the tuv111 to fit my Akra. Had to buy the tuv227
|
|
|
Post by Clemo on Nov 20, 2017 12:54:09 GMT
I'll take a pic of the differences between the 111 and the 227. The 111 has more of an angle to it
|
|
|
Post by covertlaugh on Nov 21, 2017 13:18:52 GMT
Clemo was the tuv227 hard to fit? What's your opinion on the noise and any effects on the power when you fitted it? Thanks
|
|
|
Post by Clemo on Nov 21, 2017 13:42:02 GMT
Clemo was the tuv227 hard to fit? What's your opinion on the noise and any effects on the power when you fitted it? Thanks I haven’t drilled a retaining hole yet, it slides in perfectly though. Not ran it with baffle fitted either. Been off the bike because of injury👎🏻
|
|
|
Post by covertlaugh on Nov 21, 2017 22:20:45 GMT
Ok. Thanks for that. I have seen them for around £50. I will try and get hold of one.
|
|
|
Post by Clemo on Dec 3, 2017 15:43:22 GMT
|
|
|
Post by mt10beast on Dec 24, 2017 17:08:21 GMT
Clemo was the tuv227 hard to fit? What's your opinion on the noise and any effects on the power when you fitted it? Thanks I haven’t drilled a retaining hole yet, it slides in perfectly though. Not ran it with baffle fitted either. Been off the bike because of injury👎🏻 Clemo have you tested out the Akra with the baffle yet mate.. Looking at exhausts already for the new bike that I havnt got yet lol
|
|