|
Post by X Plane on Sept 17, 2018 11:59:47 GMT
I have just gone for the Brembo SA. It sure is an improvement. Especially the initial bite is much better. So for now the radial Brembo is on hold :-) Ditto me too.
|
|
|
Post by exuptoy on Oct 26, 2018 21:02:55 GMT
Fitted SBS 634HS sintered pads to mine today. Not ridden it yet but looking forward to it. Will report back once ridden. No brainer for £30 for a full front end set from BikespeedUK.com
|
|
|
Post by dangermouse on Oct 27, 2018 12:03:00 GMT
Fitted SBS 634HS sintered pads to mine today. Not ridden it yet but looking forward to it. Will report back once ridden. No brainer for £30 for a full front end set from BikespeedUK.com Blimey, that's cheap! If the reports are good - I'll definitely give 'em a go next time. I'm still loving my Brembo SAs though, faultless after 8 trackdays wet and dry.
|
|
|
Post by exuptoy on Oct 27, 2018 16:36:26 GMT
Bikespeed uk are cheap for SBS pads. They're the cheapest I've found.
Did a few miles today and these pads are much better than standard. They are quite grabby when you squeeze the lever and you seem to have more feel. They also haul you up quickly, for the money, very impressed.
|
|
|
Post by X Plane on Nov 25, 2018 18:23:46 GMT
I have just gone for the Brembo SA. It sure is an improvement. Especially the initial bite is much better. So for now the radial Brembo is on hold :-) SA Brembo pads are grand. I Have them in front and rear. Fronts have been in for about 14000 miles. However, the rears have only lasted about 3500 miles, that may just be me though, but it is less than the EBC HH pads that I had in rear previous. Ah well they are not too dear.
|
|
fuzzy
Full Member
Posts: 167
|
Post by fuzzy on Nov 30, 2018 12:30:05 GMT
I have just gone for the Brembo SA. It sure is an improvement. Especially the initial bite is much better. So for now the radial Brembo is on hold :-) SA Brembo pads are grand. I Have them in front and rear. Fronts have been in for about 14000 miles. However, the rears have only lasted about 3500 miles, that may just be me though, but it is less than the EBC HH pads that I had in rear previous. Ah well they are not too dear. Should try their LA compound. I'm extremely happy with the Brenta pads I bought. Haven't missed a beat around the lakes even with repeated hard stops. Just excellent. 6500 miles and still going strong 😁 BRENTA FTW
|
|
bogus
Junior Member
Posts: 13
|
Post by bogus on Sept 17, 2020 10:35:36 GMT
I have just gone for the Brembo SA. It sure is an improvement. Especially the initial bite is much better. So for now the radial Brembo is on hold :-) Can you please share the exact part number and where I can buy them ? I tried SBS and it says the SA ones are not suitable for the SP.
|
|
johnb
Junior Member
Posts: 15
|
Post by johnb on Sept 17, 2020 15:32:32 GMT
Hi This is the set i put in last year and they work well for my spirited riding. COMPLETE BRAKE PADS KIT BREMBO FRONT + REAR SINTER "RED" ROAD SA / SP FEATURES THE KIT INCLUDES: - 2 KIT SINTER ROAD SA FRONT BRAKE PADS 07YA23SA - 1 KIT SINTER ROAD SP BRAKE PADS 07HO36SP
|
|
bogus
Junior Member
Posts: 13
|
Post by bogus on Sept 18, 2020 9:24:00 GMT
Hi This is the set i put in last year and they work well for my spirited riding. COMPLETE BRAKE PADS KIT BREMBO FRONT + REAR SINTER "RED" ROAD SA / SP FEATURES THE KIT INCLUDES: - 2 KIT SINTER ROAD SA FRONT BRAKE PADS 07YA23SA - 1 KIT SINTER ROAD SP BRAKE PADS 07HO36SP Thank you!!
|
|
|
Post by richie on Nov 2, 2020 19:42:18 GMT
I’d like a better initial bite from the front brakes on my MT. I do most of my miles on road, and a few track days a year. After hearing how the Brembo pads on BJ’s (from Fast Bikes) MT-10 transformed it, I’d like to try some pads. He said the pads were Brembo Road and Track pads from HPS, so I assume he means the SC Sintered pads. Has anyone got any good experiences with any other pads, or with these ones? Thanks in advance, Dan. Barenboim SC pads. So good I’ve just ordered a spare pair.
|
|
|
Post by bigbadbaz on Dec 22, 2021 15:14:52 GMT
Looking for these pads for my 2017 MT10SP, part number 52007. Do these fit the SP, any recommendations where to get them please. Some suppliers seem to think they dont fit the SP.
|
|
|
Post by NSR500 on Dec 23, 2021 11:16:40 GMT
if they fit MT10 they will do the SP too
|
|